Getting started
12
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 8 (middle soft key)
2 {V}/{^}: “Base Unit Setup” i M
3 {V}/{^}: “Dial Mode” i M
4 {V}/{^}: Select the desired setting. i M
i {ih}
Date and time
1
8 (middle soft key)
2 {V}/{^}: “Handset Setup” i M
3 {V}/{^}: “Time Settings” i M
4 {V}/{^}: “Set Date/Time” i M
5 Enter the current date, month, and year. i
M
Example: 15 July, 2009
{1}{5} {0}{7} {0}{9}
6 Enter the current hour and minute.
Example: 15:30
{1}{5} {3}{0}
7 M i {ih}
Note:
L When you select Arabic as the display
language, enter the current year, month, and
date.
L To correct a digit, press {^} or {V} to move the
cursor to the digit, then make the correction.
L The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Y Handset
Y Handset
TG6451BX(e).book Page 12 Wednesday, July 8, 2009 10:25 AM
To Next Page
Loading...
