Programming
25
For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
Programming using the direct commands
1
{MENU} i {#}
2 Enter the desired code.
3 Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Customer support
a
–––
Feature Code Setting System
*1
Page
Caller list {2}{1}{3} ––34
V.M. access
(V.M.: Voice mail)
{3}{3}{0} ––44
Intercom {2}{7}{4} ––45
Date and time {1}{0}{1} – r 15
Alarm {7}{2}{0}{1}: Once {2} : Daily
{0}: <Off>
–29
Time
adjustment
*2
{2}{2}{6}{1}: <Caller ID auto>
{0}: Manual
r –
Ringer volume
*3
(Handset)
{1}{6}{0}{1}–{6}: Level 1–6 <6>
{0}: Off
––
Ringer tone
(Handset)
*4,
*5,
*6
{1}{6}{1}{1}–{5}: Tone 1–5
<Tone 1>
{6}–{0} : Melody 1–5
––
Silent mode
(On/Off)
{2}{3}{8}{1}: On {0} : <Off>–29
Silent mode
(Start/End)
{2}{3}{7} <11:00 PM/06:00 AM>– 30
Handset name {1}{0}{4} ––30
Call block {2}{1}{7} – r 30
Block w/o num
(Block calls without
phone number)
{2}{4}{0}{1}: On {0} : <Off> r 31
Main menu Sub-menu 1 Sub-menu 2 Page
TG6511(e).book Page 25 Wednesday, April 28, 2010 4:35 PM
To Next Page
Loading...
