momentarily. This is normal and the
h
andset can be used once
is displayed.
Registering the DECT repeater
(
KX-A405AL) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Press and hold M
N for about 5 seconds,
until the registration tone sounds.
R The next step must be completed
within 90 seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the indicator and indicator light
green.
3 Base unit:
To exit the registration mode, press M N.
R T
he registration tone stops.
33
Programming
To Next Page
Loading...
