Preparation
10
2 Insert the batteries negative (T)
end first. Close the handset cover.
Note:
L When replacing batteries, remove the
old batteries.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
When charging, “Charging” will be
displayed.
When the batteries are fully charged,
“Charge Completed” will be
displayed.
*1 The pictured model is KX-TG7200.
*2 KX-TG7202
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Battery level
Rechargeable Ni-MH ONLY
Base unit
*1
Charger
*2
Battery icon Battery level
5 High
6 Medium
7 Low
L When flashing:
Needs to be
charged.
TG7200-7220FX(e-e).book Page 10 Friday, June 29, 2007 10:24 AM
To Next Page
Loading...
