Panasonic KX-TG8421E - Battery Installation;Battery Charge; Screen Saver Mode

– 2 –
Battery installation/Battery charge
Charge for about 7 hours.
Note:
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
LWhen the language selection is displayed after installing the batteries for the first
time, you can select your desired language.
{V}/{^}: Select your desired language. i M i {ih}
Screen saver mode
The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity if the handset is not on the base
unit or charger.
Activate the handset display again by:
– pushing the joystick left {<} or right {>}
when on a call.
–pressing {ih} at all other times.
Confirm “ Charging ”
is displayed.
Rechargeable Ni-MH ONLY
{ih}
{<}, {>}
TG8421E(e)_QG.fm Page 2 Wednesday, December 24, 2008 2:14 PM