Panasonic KX-TG9341

Quick troubleshooting
~ No dial tone is heard from handset.
See if "Check tel line" is shown on the handset display.
Displayed
Not displayed
is
"Talk" is
"""""' ......... """"'1Ii1 displayed.
Press [~] (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
!lIE '''No link to
;
base. Reconnect
AC adaptor."
is displayed.
Lift up the handset from the base unit or
charger.
Press [~ ] (TALK) at the handset, then
check if the display shows "Talk".
Still displayed
Check if the
telephone cord is
properly connected
to both the base
unit and telephone
line jack on the
wall.
Try to connect your
telephone into a
different line.
Try remedy for
[I] on previous
page.
Your telephone
may need service
when only back
speaker provides
a dial tone.
Still displayed
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
-6-