Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, register the handset.
[MENU]
~
[U][1][3][0]
[MENU]
Press and hold [LOCATOR] for 4
seconds until the registration tone
sounds.
• The next step should be completed
within 90 seconds.
• While registering,
"Base
registering"
is
displayed
on
all
registered handsets.
[LOCATOR]
Press [OK], then press [OFF] after a
long beep sounds.
Press
LOCATOR
on
base
for
4sec
Then
press
OK.
[OK]
-7-
To Next Page
Loading...
