Panasonic KX-TM100B

| Settings
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2" to “7" or “AUTO (for Toll saver*)”. Your unit
comes from the factory set to “AUTO”.
-j Press [FUNCTION] 4 times.
•The current setting is displayed.
2 Press [SKIP/FF] or i REPEAT/REW) until the desired setting is displayed.
2-7: The unit will answer after the selected number of rings.
A: Selects “AUTO".
2 Press (FUNCTION) .
•A long beep sounds and the setting is saved.
•To exit the programming mode, press (STOP) or wait for 60 seconds.
*Toll saver (When set to “AUTO”)
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
12