Panasonic KX-TM100B

Programming Summary of Preparation
You can program the following functions. See the page numbers below for
details.
Press (function) to enter the programming mode.
The display shows the number of
recorded messages.
To set day, see page 10.
To set hour of day, see page 10.
To set minutes, see page 10.
To select the number of rings,
see page 12.
To set the remote code,
see page 19.
Press (SKIP/FF) or [REPEAT/REW] for the desired settings.
When finished, press (FUNCTION) .
•You can exit the programming mode any time by pressing (STOP) or
waiting for 60 seconds.