Panasonic KX-TM100B

Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00-99). The
factory preset remote code number is “11”. If you do not program your own
remote code number, you can use “11”.
-j Press (FUNCTION) 5 times.
•The current remote code is displayed.
^ Press (SKIP/FF) or [REPEAT/REW] until the desired code is displayed.
• Press [erase] to clear the code.
2 Press (FUNCTION) .
•A long beep sounds and the code is saved.
•To exit the programming mode, press (STOP) or wait for 60 seconds.
19