3.1 System Manager's Guide
Feature Manual 71
6. Press [2] to accept the entry.
7. As each parameter is announced:
a) Press [1] to enter the new parameter or [2] to leave the parameter unchanged.
b) Enter the parameter.
c) Confirm the new parameter is correct, then press [2] to accept it.
8. The Auto Forwarding Status parameter is the last parameter to be entered. When this entry is
completed, the prompt at Step 4 will appear. Continue assigning or editing other mailboxes by
repeating Steps 5-7.
9. To return to the Main Menu, press [ ] twice.
Deleting a Mailbox
The System Manager should delete mailboxes that are no longer needed. When another person
accesses the VPS, the action is automatically cancelled.
1. Log in to the System Manager's mailbox.
2. Press [4] for Other Features.
3. Press [1] for Mailbox Setup.
4. Press [2] for Delete.
5. Enter the mailbox number.
6. Press [1] to delete the mailbox.
To Next Page
Loading...
