Panasonic KX-TVM50 - Recording System Caller Names

3.2 Message Manager's Guide
Feature Manual 99
g) The VPS plays the next prompt number.
h) Repeat Steps 7d to 7g to record other prompts.
Recording System Caller Names
Before recording System Caller Names, the associated telephone numbers must first be programmed
(See 2.5.3 System Caller Name Announcement in the Programming Manual.)
1. Log in to the Main Menu.
2. Press [5] to modify messages.
3. Press [7] to modify system caller names.
4. Enter the Caller ID List Number
*1
(1-200) to be modified.
• Enter [ ] to return to Step 3.
5. The VPS announces the Caller ID number and its name. To change the name, press [1]. If a
name has not yet been recorded for this Caller ID number, go to Step 6.
• Press [2] to accept the current name—Return to Step 4.
• Press [3] to erase the current name—Return to Step 4.
6. Record the name after the tone and press [1].
7. The VPS announces the recorded name. Press [2] to accept it.
• Press [1] to change the recorded name—Return to Step 6.
• Press [3] to erase the recorded name—Return to Step 4.
8. Repeat Steps 4-7 to record names for other Caller ID List numbers.
*1
Guidance is "Caller Name Announcement number".