Panasonic KX-TVM50 - Personal Options

3.1 System Manager's Guide
76 Feature Manual
Number of Caller IDs for Personal Caller Name Announcement
Number of New Message Announcement
Total Number of Message Announcement
Mailbox Capacity Warning
Personal Options
These are settings which enable or disable certain features by COS. Follow the steps detailed below
to set the following parameters:
• Delete Message Confirmation
• Caller ID Callback
• Remote Call Forward to CO*
2
• Play System Prompt after Personal Greeting*
1
• Use Call Waiting on Busy*
1
• Message Cancel for Live Call Screening*
1
• VM Menu*
1
• Personal Greeting for Caller ID*
1
• Caller ID Screen*
1
• Call Transfer to Outside*
1
14.
a) The current setting is announced. Press [1] to change the current setting.
b) Enter the number of announcements that can be programmed by subscribers
(1-30/0: None).
c) Confirm the entry is correct, then press [2] to accept it.
15.
a) The current setting is announced. Press [1], [2], or [3] to change the current setting
(Subscriber Service, Receiving Message, or None).
• [1] Subscriber Service
• [2] Receiving Message
• [3] None
b) Confirm the entry is correct, then press [4] to accept it.
16.
a) The current setting is announced. Press [1], [2], or [3] to change the current setting
(Subscriber Service, Receiving Message, or None).
b) Confirm the entry is correct, then press [4] to accept it.
17.
a) The current setting is announced. Press [1] to change the current setting.
b) Enter the warning threshold (1-60 min or 0: None).
c) Confirm the entry is correct, then press [2] to accept it.