Panasonic KX-TVM50 - Page 75

3.1 System Manager's Guide
Feature Manual 75
Prompt Mode
Message Envelope Setting
Intercom Paging Group
11.
a) The current setting is announced. Press [1] to [10] (KX-TVM200) or press [1] to [3]
(KX-TVM50) to change the desired mode.
KX-TVM200
• [1] System 1 Prompt
• [2] System 2 Prompt
• [3] System 3 Prompt
• [4] System 4 Prompt
• [5] System 5 Prompt
• [6] System 6 Prompt
• [7] System 7 Prompt
• [8] System 8 Prompt
• [9] System 9 Prompt
• [10] System 10 Prompt
KX-TVM50
• [1] System 1 Prompt
• [2] System 2 Prompt
• [3] System 3 Prompt
b) Confirm the entry is correct, then press [3] to accept it.
12.
a) The current setting is announced. Press [1], [2], or [3] to change the current setting
(Before, After, or Require).
• [1] Before
• [2] After
• [3] Require
b) Confirm the entry is correct, then press [4] to accept it.
13.
a) The current setting is announced. Press [1] to change the current setting.
b) Enter the group number (1-33).
c) Confirm the entry is correct, then press [2] to accept it.
Note
• If set to "33 (Group 33)", the Intercom Paging feature is activated for all groups.