3.1 System Manager's Guide
80 Feature Manual
Automatic Log-in (Toll Saver) > Caller ID Call Routing > DID Call Routing > Trunk Service
> Port Service
(Holiday Service are disregarded.)
Follow the steps below to assign a Service Mode to each Service Group 1-8.
1. Log in to the main menu.
2. Press [4] for other features.
3. Press [4] to change Service Mode setting.
4. Enter the Service Group number (1-8).
5. The VPS announces the current setting. Press [1] to change the setting.
6. Press [1], [2], [3], [4], [5], or [6] to choose the desired Service Mode entry.
• [1] Automatic Mode
• [2] Manual Day Mode
• [3] Manual Night Mode
• [4] Manual Lunch Mode
• [5] Manual Break Mode
• [6] PBX Control Mode
7. Confirm the entry is correct, then press [2] to accept it.
To Next Page
Loading...
