3.2 Message Manager's Guide
94 Feature Manual
7. Enter the extension number.
8. The VPS announces the current extension setting. Press [2] to accept it.
9. Repeat steps 6-8 to assign or to delete the extension number for the Day, Night, Lunch and Break
Modes for each operator.
10. The VPS announces the current Telephone number 1 setting. Press [1] to change or assign the
telephone number. Press [2] to accept the current setting—Go to Step 13.
11. Enter the telephone number using "0-9" and " ".
Note
• Please make sure you begin the telephone number with a Trunk Access number (to seize a
trunk).
• When connected to the KX-TD500 or the KX-TDA series, the maximum number of
characters allowed to be entered is 24; when connected to any other KX-T series PBX, 16.
12. The VPS announces the current telephone number 1 setting. Press [2] to accept it.
13. The VPS announces the current telephone number 2 setting. Press [1] to change or assign the
telephone number. Press [2] to accept the current setting.
14. Enter the telephone number using "0-9" and " ".
15. The VPS announces the current telephone number 2 setting. Press [2] to accept it.
To Next Page
Loading...
