92
⿎
Lot condition : LTC
Sets the condition of “Lot Function” to change characters depending on date/time and counter values.
• Setting / Readout data of lot condition
STX LTC
Sub
command
[Lot No.] [Lot target] [Period unit]
4-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of lot condition
STX LTC R
[Lot No.]
1-byte
(Check sum) Delimiter
Name Data length [byte] Description Remarks
Lot No. 1 “0”–“7” “4”–“7”: common lot
Lot target 2
“00”: current
“01”–“08”: expiry 1 to 8
“10”–“17”: counter 0 to 7
The unit of period to switch the character
string for marking is indicated.
Period unit 1
“0”: year or counter
“1”: month
“2”: day
“3”: Y/M
“4”: M/D
“5”: day of week
“6”: hour
“7”: week
“8”: minute
“9”: hour/min.
“A”: week-based year
Reference
• When the period unit of the lot condition (LTC command) is changed, the lot period and lot character (LTS command)
settings registered to that lot number are deleted.
To Next Page