Using Simple Viewer
20
1. Select [ Export to the
card].
2. Select any folder, and in
thumbnail view, select any
picture.
3. Click [ Add].
The selected picture is added to the list at
the bottom of the screen.
• To remove any picture from the list at the
bottom of the screen, click the picture in
the list at the bottom of the screen, and
then click [
Cancel
].
4. Click [ Write].
• Writing to the card is carried out.
• The pictures will be converted
automatically to the format that the
Panasonic digital camera can reproduce.
• Use a Card with sufficient free space. In
case of inadequate free space, only
some of the pictures are written.
• Pictures processed on the PC and those
recorded with digital cameras other than
the LUMIX camera may be displayed
improperly.
Viewing pictures stored on the PC with the digital
camera ( Export to the card)
• Transferring pictures from the PC to the Card to enable them to be reproduced by the
digital camera.
VQT1H06ENG.book 20 ページ ２００７年３月２０日 火曜日 午後１時２７分
To Next Page
Loading...
Need help?
General
