Using Simple Viewer
22
After Using Simple Viewer
∫ To exit Simple Viewer:
1. Click [ Exit].
• When the [ Exit] button is not
displayed, click [ Menu] to return to the
main menu.
• When you try to exit on any screen other
than the main menu screen, the
confirmation message appears.
∫ To disconnect the USB
connection cable safely:
1. Double-click the icon
displayed at the right bottom
(in the task tray) of the PC
screen.
The message for notifying hardware
removal is displayed.
2. Select [USB Mass Storage
Device], and click [Stop].
3. Confirm that [USB Mass
Storage Device] is selected,
and click [OK].
4. Click [Close].
You can remove the USB connection cable
safely.
• Depending on the OS (or OS settings)
such as Windows 98/98SE, the icon for
removing hardware safely is not
displayed in the task tray. In this case,
make sure that [ACCESS] is not shown
on the LCD monitor of the digital camera,
and then disconnect the USB connection
cable.
VQT1H06ENG.book 22 ページ ２００７年３月２０日 火曜日 午後１時２７分
To Next Page
Loading...
