Panasonic Lumix DMC-FX100 Connecting Guide

Setting up
8
A: USB connection cable
B: AC Adaptor
• The illustrations show examples of those
of the DMC-FX100.
• AC adaptors may be optionally supplied
depending on the model.
Preparations on the digital camera side
When you connect the digital camera to
the PC, use batteries with sufficient
battery power or the AC adaptor. If the
remaining battery power is exhausted
during communication, the recorded data
may be damaged.
• If you use the AC adapter, connect it.
• Turn on the digital camera.
1. Connect the digital camera
to the PC via the supplied
USB connection cable.
• Set the digital camera for connecting to a
PC. (For details, refer to the operating
instructions for the digital camera.)
• When the connection is established
correctly, Simple Viewer automatically
opens the screen to begin file transfer.
(P9)
If Windows 98 is used, refer to P23.
• When the following screen appears, click
[Cancel] to close it.
• If Simple Viewer does not start
automatically, refer to P27.
• Do not operate the digital camera or
disconnect the USB connection cable
while transferring data from the digital
camera. The software may not function
correctly and damage the data being
transferred.
• The shape of the terminal varies
depending on the digital camera used.
For details, refer to the operating
instructions for the digital camera.
Connecting the Digital Camera to PC
• When Windows 98/98SE is used, install the USB driver (P6) before connection.
• If the PC has a built-in SD memory card slot, insert a Card into the slot and you can
transfer pictures to the PC by use of Simple Viewer.
VQT1H06ENG.book 8 ページ ２００７年３月２０日 火曜日 午後１時２７分

Panasonic Lumix DMC-FX100 Specifications

General

Brand	Panasonic
Model	Lumix DMC-FX100
Category	Digital Camera
Language	English