Others
28
About printing
Others
Question Answer
No pictures can be printed. Is the printer set up correctly? Refer to the operating
instructions for your printer.
I wish to change the print
position, character size, or
character color of the date.
The print position, character size, or character color for
date printing are fixed. They cannot be changed.
The top and bottom parts or
left- and right-end parts of a
picture are trimmed.
Set [Trimming] to [No] when printing.
A trimmed picture is printed with its edges trimmed off if its
aspect ratio is different from that of the printing paper.
Blank spaces are left in the
top and bottom parts or the
left- and right-end parts.
Set [Trimming] to [Yes] when printing.
If trimming is not applied, the whole picture is printed. If the
aspect ratio of the paper is different from that of the image,
blank spaces are left in the top and bottom parts or the left-
and right-end parts.
A date is printed over the
existing date.
The pictures have been imprinted with the date.
Set [Date printing] to [No] when printing.
The date is not printed. If the picture was recorded with a digital camera with the
clock not set, or if it was recorded with any digital camera
other than a Panasonic, its date may not be printed
correctly.
Question Answer
Pictures added onto the PC
are displayed incorrectly.
If you change folder names or file names, the pictures
concerned may not be displayed.
• To view on Simple Viewer the pictures associated with a
change in folder name or file name, register those
pictures by use of [ Add pictures] function. (P19)
How should I change folder
names or file names?
You can change folder names or file names on the PC.
• The location where folders and files are stored can be
found at [Location] indicated in the picture information.
(P12)
• To view the pictures associated with a change in folder
name or file name, register those pictures by use of the
[ Add pictures] function. (P19)
VQT1H06ENG.book 28 ページ ２００７年３月２０日 火曜日 午後１時２７分
To Next Page
Loading...
Need help?
General
