Playback/Editing
- 110 -
Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.
• Motion pictures cannot be divided at a location close to the start or end of the motion picture.
• With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures by using [Calendar] or [Video Only] in the
[Filtering Play].
• Motion pictures with a short recording time cannot be divided.
[Video Divide]
Select [Video Divide] on the [Playback] menu. (P39)
Select the motion picture you wish to divide, and touch [Set].
Touch [ ] at the location to divide.
• Motion picture is played back from the same location when [ ] is touched again.
• Make fine adjustments to the division position by touching [ ]/[ ] while the motion
picture is paused.
Touch [ ].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the
dividing.
To Next Page
Loading...
