Recording
- 78 -
Applicable modes:
This is for recording still pictures using the timer.
•
Press the shutter button halfway to focus and then press it fully to take
the picture. The Self-timer indicator blinks and the shutter is activated
after 10 seconds (or 2 seconds).
Note
•
When you press the shutter button once fully, the subject is
automatically focused just before recording. In dark places, the
Self-timer indicator A will blink and then may turn on brightly operating
as an AF Assist Lamp to allow the camera to focus on the subject.
• We recommend using a tripod when recording with the Self-timer.
• The Self-timer cannot be set when recording motion pictures.
[Selftimer]
Settings Description of settings
[10sec.]
Pictures are taken 10 seconds after shutter is pressed.
[2sec.]
Pictures are taken 2 seconds after shutter is pressed.
• When using a tripod, etc., this setting is a convenient way to
avoid the jitter caused by pressing the shutter button.
[Off]
j
To Next Page
Loading...
