- 127 -
Retouching
Improving the Visual Quality at the Touch of a
Button ([Auto Retouch])
This automatically adjusts the balance between the vividness and brightness of the picture
that you took.
•
The processed pictures are newly generated, so be sure that you have enough space in the
built-in memory or on the card. Note also that processing will not be possible if the
Write-Protect switch of the card is in the [LOCK] position.
¢ These pictures are examples to show the effect.
Note
•
Depending on the picture, noise may be emphasised by [Auto Retouch].
• Effects may be difficult to see depending on the picture.
• It may not be possible to perform [Auto Retouch] on pictures which have already been
retouched.
• [Auto Retouch] may not be performed on pictures recorded with other equipment.
• [Auto Retouch] is not possible in the following cases:
– Motion pictures
– 3D pictures
– Pictures taken in [Panorama Shot] and [Photo Frame] in Scene Mode
– Pictures processed using [Image Stamp]
Select a still picture and touch [ ].
Touch
[Auto Retouch]
.
Select [ON], and touch [OK].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
To Next Page
Loading...
