Before Use
- 8 -
How to Use the Touch Screen
This touch screen is a type that detects pressure.
Note
•
If you use a commercially available liquid crystal protection
sheet, please follow the instructions that accompany the
sheet. (Some liquid crystal protection sheets may impair
visibility or operability.)
• Apply a little extra pressure when touching if you have a
commercially available protection sheet affixed or if you feel it
is not responding well.
• Touch screen will not operate properly when the hand holding
this unit is pressing on the touch screen.
• Do not press with an object with a pointed or hard tip.
• Do not operate with your fingernails.
• Do not scratch or press the LCD monitor too hard.
• Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and others.
• For information about the icons displayed on the touch screen, refer to “Screen Display” on
P149.
Touch the screen
To touch and release the touch screen.
Drag
A movement without releasing the touch
screen.
Use this to perform tasks such as selecting
icons or images displayed on the touch
screen.
•
It may not operate properly when multiple
icons are touched simultaneously, so try to
touch the centre of the icon.
This is used when performing tasks such as
moving to the next image by dragging
horizontally, or changing the range of the
displayed image.
This can also be used to perform tasks such
as switching the screen by operating the
slide bar.
To Next Page
Loading...
Need help?
General
