- 141 -
Connecting to other equipment
Note
•
Use a battery with sufficient battery power. If the remaining battery power becomes low while
the camera and the PC are communicating, the status indicator blinks and the alarm beeps.
Refer to
“Disconnecting the USB connection cable safely” (P142) before disconnecting the
USB connection cable. Otherwise, data may be destroyed.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition).
A new folder is created when pictures are taken in the following situations.
•
After [No.Reset] (P48) in the [Setup] menu has been executed
• When a card containing a folder with the same folder number has been inserted (such as when
pictures were taken using another maker of camera).
• When there is a picture with file number 999 inside the folder
For Windows: A drive ([Removable Disk]) is displayed in [Computer]
For Mac: A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the
desktop
DCIM: Images
1 Folder number
2 File number
3 JPG: Still pictures
MP4: [MP4] Motion pictures
MPO: 3D pictures
4 [My Photo Album]
MISC: DPOF print
Favourite
AVCHD: [AVCHD] Motion pictures
AD_LUMIX: For Upload set
LUMIXUP.EXE: Upload tool
“LUMIX Image Uploader”
¢ Cannot be created in the built-in memory.
To Next Page
Loading...
Need help?
General
