109
VQT1U32
Advanced (Recording pictures)
• It will display dial operation guide to the screen that is possible to
perform exposure compensation, Program shift, aperture setting, or
shutter speed setting when set to [ON].
A Dial operation guide
• Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust.
• Imaging device and image processing is optimized when the camera is purchased, and it
needs to be optimized annually after the purchase.
• Turn the camera off and on after the pixels are corrected.
[DIAL GUIDE]
Sets if the operation switch guide when the mode dial is switched
to , , and is to be displayed or not.
[OFF]/[ON]
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing, along with the dust reduction (P138).
[SHOOT W/O LENS]
It is possible to setup so the shutter will not operate when there is
no lens on the unit.
[OFF]: You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
[ON]: Shutter will operate regardless of the lens on the unit.
To Next Page
Loading...
