6. Shutter and Drive Settings
192
• If the burst time was short, a smaller number of frames are displayed in slide view. [ ]
and [ ] cannot be selected.
• During marker operation, you can skip to the markers that you added or the beginning or
end of the 4K burst file. Press [Fn2] again to return to the original operation.
• When you have selected frames that are not currently displayed in slide view, such as
when you have selected [ ] or [ ], it may take a few seconds until the slide view
frames are displayed.
Button operation Touch operation Description of operation
2/1 Touching>Dragging
Selects a frame
•
You can select a frame from 60 frames
(continuous burst time of approximately
2 seconds).
Select /
with 2/1 >
[MENU/SET]
/
Displays the previous or next frames in
slide view
•
The previous or next 45 frames (burst time
of approximately 1.5 seconds) will replace
45 of the frames that are currently
displayed in slide view.
• Pressing the same button again will
display the frames following the next ones
or the ones preceding the previous ones.
s
Touching/Dragging
Selects the frames to be displayed
•
Frames preceding and following the
selected frame will be displayed in slide
view.
Pinching out/in
Enlarges/reduces the display
3/4/2/1 Dragging
Moves the enlarged area
(during enlarged display)
[Fn1]
Displays the 4K burst playback screen.
[Fn2]
Switches to marker operation ([ ]
([4K Burst(S/S)]) only)
[MENU/SET]
Saves the picture
Button operation Touch operation Description of operation
1
Moves to the next marker.
2
Moves to the previous marker.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
