227
8. Stabilizer, Zoom and Flash
• When the Extended Tele Conversion is used, angle of view for still pictures will be different from
the angle of view for motion pictures because the zoom factor is different between them.
Angle of view for recording can be checked beforehand by matching the [Rec Area] (P243)
setting to the mode you wish to record in.
• If you assign [Ex. Tele Conv.] to [Fn Button Set] (P70) in the [Custom] menu, you can display
the Extended Tele Conversion setting screen for both pictures and motion pictures by pressing
the assigned function button. While this screen is displayed, you can change the [Picture Size]
setting by pressing [DISP.].
Not available in these cases:
•
This function is not available in the following cases:
– [Handheld Night Shot] (Scene Guide Mode)
– [Toy Effect]/[Toy Pop] (Creative Control Mode)
– When [Quality] is set to [ ], [ ] or [ ]
– When [Burst Rate] is set to [SH]
– When recording 4K photos
– When [HDR] is set to [ON]
– When using [Multi Exp.]
– When the motion picture size is set to [4K] in [Rec Quality]
– When the image of the camera is output through the HDMI connection (except for Creative
Video Mode)
Applicable modes:
Although the image quality deteriorates every time you zoom in further, you can zoom in
up to four times the original zoom magnification.
(Continuous zooming is not possible.)
•
When using the Digital Zoom, we recommend using a tripod and the self-timer (P201) for taking pictures.
• Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
Not available in these cases:
•
This function is not available in the following cases:
– [Toy Effect]/[Toy Pop]/[Miniature Effect] (Creative Control Mode)
– When using [Multi Exp.]
[Digital Zoom]
> [Rec] > [Digital Zoom] > [4t]/[2t]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
