291
11. Using the Wi-Fi function
Wi-Fi function
∫ Before Use
•
Set the date and time settings in advance. (P41)
• To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped
with the wireless LAN function is required.
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
In this owner’s manual, a function button to which [Wi-Fi] is assigned is
referred to as the [Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn6].)
•
Refer to P70 for details about the function button.
To start up the Wi-Fi function:
1 Touch [ ].
2 Touch [ ].
Pressing [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to this
unit is displayed. (P295)
• You can select the following items by pressing [DISP.].
(You can also display the same menu by performing the following
operations:
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function].
)
• This owner’s manual describe the procedure for [New Connection].
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi connection
[New Connection]
[Select a destination from History] (P332)
[Select a destination from Favorite] (P332)
To Next Page
Loading...
