221
7. Functions Customized for Various Subjects and Purposes
Applicable modes:
You can display the recording screen in black and white. This function is convenient when
a black and white screen will make it easier to set focus with Manual Focus.
Settings: [ON]/[OFF]
•
Even if you use the HDMI output during recording, this function will not work for the connected
device.
• Recorded images will not be affected.
Recording while monitoring camera images
Applicable modes:
When using the HDMI output, you can take pictures while
monitoring the camera image on a TV, etc.
Refer to P341 on how to connect with TV by using HDMI
micro cable.
•
The camera image is not output to the TV during motion picture
recording.
∫ Switching the information displayed
You can change the display shown during HDMI output using [HDMI Info Display (Rec)]
(P79) in [TV Connection] on the [Setup] menu.
•
When using the Auto Focus Mode [ ] or MF assist, the screen cannot be enlarged in
windowed mode.
• [Aspect Ratio] in the [Rec] menu is fixed to [16:9].
• Electronic sounds and electronic shutter sounds are muted.
• If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
• The scene selection screen in Scene Guide Mode is not output through the HDMI connection.
• Images are not output through the HDMI connection in panorama picture recording.
• When recording with the 4K Photo function, it is not possible to use the HDMI output.
Displaying the recording screen in black and white ([Monochrome Live View])
> [Custom] > [Monochrome Live View]
[ON]:
The camera display is output as is.
[OFF]:
Only images are output.
MENU
To Next Page
Loading...
Need help?
General
Weight and Dimensions
