401
13. Others
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
• The sound, which is caused by the automatic adjustment of the aperture, is heard when the
brightness has changed due to, for example, zooming or the movement of the camera. This is
not a malfunction.
• Press [MENU/SET], select the [Setup] menu icon [ ] and then select the [~] icon to set the
desired language. (P80)
• This is a highlight function showing the white saturated area. (P56)
• In dark places, the AF Assist Lamp (P163) lights red to make it easier to focus on a subject.
• Is [AF Assist Lamp] set to [ON]? (P163)
• The AF Assist Lamp does not turn on in bright places.
• The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
• If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P41)
• When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
• If you insert or remove the battery before turning off this unit, the folder and file numbers for the
pictures taken will not be stored in the memory. When this unit is turned on again and pictures
are taken, they may be stored under file numbers which should have been assigned to
previous pictures.
There is a sound from lens unit.
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The clock is reset.
The file numbers are not recorded consecutively.
The file numbers are recorded with previously used numbers.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
