14
[CASE 2. Other than "After replacing MAIN P.C.B."]
• Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”)
[Caution: After replacing MAIN P.C.B.]
The model suffix can been chosen, JUST ONE TIME.
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can be changed.
Select the area carefully.
Select the area with pressing “[ UP ] / [ DOWN ] of Cursor buttons”, and then press the “[ RIGHT ] of Cursor buttons”.
The only set area is displayed, and then press the “[ RIGHT ] of Cursor buttons” after confirmation.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
• Step 6. CONFIRMATION:
The display shows “PLEASE SET THE CLOCK” when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference Default setting condition is given in the following table.
• Default setting (After “INITIAL SETTINGS”)
MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS
a) DMC-GH1K (Japan domestic model) NTSC Japanese Year/Month/Date
b) DMC-GH1KPP NTSC English Month/Date/Year
c) DMC-GH1KEB/EC/EG/GC/GH/GN PAL English Date/Month/Year
d) DMC-GH1KGK PAL Chinese (simplified) Year/Month/Date
e) DMC-GH1KGT NTSC Chinese (traditional) Year/Month/Date
To Next Page
Loading...
Need help?
General
