24
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[THIS MEMORY CARD IS LOCKED]
The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are
moved to [LOCK]. Move the switch back to unlock it.
[NO VALID PICTURE TO PLAY]
Record a picture or insert a card with a recorded picture and then play it.
[THIS PICTURE IS PROTECTED]
Delete the picture after canceling the protect setting.
[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]
s Pictures not based on the DCF standard cannot be deleted.
If you want to delete some pictures, format the card after saving necessary data on a PC
etc.
[NO ADDITIONAL SELECTIONS CAN BE MADE]
s The number of pictures, which can be set at one time when [MULTI] has been selected for
[DELETEMULTI], [FAVORITE], [TITLE EDIT], [TEXT STAMP] or [RESIZE] has been
exceeded.
Reduce the number of pictures set, and then repeat the operation.
s More than 999 favorites have been set.
[CANNOT BE SET ON THIS PICTURE]
s [TITLE EDIT], [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the
DCF standard.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
s This card has a format which is not recognized by the camera.
Format the card again with the camera after saving necessary data on a PC etc.
[PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY]
s Do not press the lens release button.
s Check that the lens is attached correctly and then turn the camera off and on.
If the message persists, contact the dealer or your nearest Service Center.
[THE LENS IS NOT ATTACHED PROPERLY.]
s Detach the lens and then attach it again.
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
Use a card compatible with this unit.
s You can o nly use an SDHC Memory Card if usi ng cards with 4 GB or more capacity.
To Next Page
Loading...
Need help?
General
