2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precaution -------------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
1.4. How to Discharge the Capacitor on Flash Sub
PCB------------------------------------------------------------4
2Warning--------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EB/GC/GH)-----------------6
2.4. How to Replace the Lithium Battery-------------------7
3Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. Important Notice --------------------------------------------8
3.3. General Description About Lead Free Solder
(PbF) -------------------------------------------------------- 11
3.4. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 12
4Specifications---------------------------------------------------- 15
5Location of Controls and Components------------------ 16
6Service Mode----------------------------------------------------- 32
6.1. Error Code Memory Function ------------------------- 32
7Troubleshooting Guide---------------------------------------- 34
8 Service Fixture & Tools --------------------------------------- 38
8.1. Service Fixture and Tools ------------------------------ 38
8.2. Clean Box -------------------------------------------------- 39
8.3. Service Position ------------------------------------------ 40
9Disassembly and Assembly Instructions--------------- 41
9.1. Disassembly Flow Chart-------------------------------- 41
9.2. PCB Location---------------------------------------------- 41
9.3. Disassembly Procedure -------------------------------- 42
9.4. Disassembly and Assemble Procedure for the
Lens --------------------------------------------------------- 53
10 Measurements and Adjustments -------------------------- 55
10.1. Matrix Chart for Replaced Part and Necessary
Adjustment------------------------------------------------- 55
11 Maintenace -------------------------------------------------------- 57
11.1. Notice in external cleaning----------------------------- 57
11.2. General description (Lens cleaning) ---------------- 58
11.3. Method of cleaning inside of lens (H-
VS014140: Included in DMC-GH1K) ---------------- 59