40
8.3. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Tabl e S1 Ex t ens i o n Cabl e List
CAUTION-1. (When servicing FLASH SUB PCB)
1. Be sure to discharge the capacitor on FLASH SUB PCB.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH SUB PCB”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH SUB PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH SUB PCB.
No. Parts No. Connection Form
1VFK1441 FP9001 (MAIN) - FP7701 (AF ASSIST),
FP7351 (REMOTE)
8PIN 0.5 FFC
2VFK1950 FP9005 (MAIN) - FP7201 (LCD IF) 33PIN 0.3 FFC
3VFK1443 FP9008 (MAIN) - REAR OPERATION UNIT 18PIN 0.5 FFC
4RFKZ0477 FP9006 (MAIN) - LVF UNIT 45PIN 0.3 FFC
5VFK1576DC202 P8504 (FLASH) - FLASH UNIT 2PIN CONNECTOR
6VFK1576DC202 P9003 (MAIN) - CL4901/CL4902 (HINGE SW) 2PIN CONNECTOR
7RFKZ0359 P8503 (FLASH) - FLASH UNIT 2PIN CONNECTOR
8VFK1282 P8507(FLASH) - FP9010 (MAIN),
FP4001 (AUDIO)
22PIN 0.5 FFC
9VFK1576DC202 FP4004 (AUDIO) - SPEAKER 2PIN CONNECTOR
To Next Page
Loading...
Need help?
General
