15
CUSTOM Mode
Command
Menu
Page
Option Description Option Value Value Description
SENSOR CLEANING 7
This command removes dust from the sensor by rapidly vibrating it. Use
this command if you wish to clean the sensor during operation of the
camera.
Note: The sensor is automatically cleaned every time you turn the camera
on.
START PROCESSING?
[YES]
Start the sensor cleaning process.
START PROCESSING?
[NO]
Do not start the sensor cleaning process.
SHOOT W/O LENS 7
This command allows the shutter to be fired when a non-Four Thirds
or Micro Four Thirds lens is attached. It is also used when the camera is
mounted on a microscope or telescope.
OFF
Prevents the shutter-release button from being pressed when the camera
does not recognize the attached lens, if no lens is attached, or if the lens is
attached incorrectly.
ON
Activates the shutter-release button even when the camera does not
recognize the attached lens, no lens is attached, or the lens is attached
incorrectly.
SETUP Mode
Command
Menu
Page
Option Description Option Value Value Description
CLOCK SET 1
This command sets the camera’s date and time information. The current
date and time stamp will be stored with each picture and video. You can
print the recorded information on hard copy pictures, and you can see it
during playback of pictures and videos. It can also determine your sub-
jects’ ages in the Face Recognition function and in the PET and BABY1/
BABY2 predefined scene modes. The clock will also enable the camera to
determine when you are on vacation based on travel dates that you enter.
Enter in Information
Enter time, date, date format, and time display format: The chosen for-
mats will be used throughout the camera’s software. If the mm/dd/yyyy
date format is chosen, the displayed dates will be in this format.
Note: The clock setting can be maintained for three months by the built-
in clock battery if the camera’s regular battery is nonoperational or if it
is removed from the camera. The built-in clock battery can be recharged
from the camera battery within 24hours.
WORLD TIME 1
Use this option to set your home’s and travel destination’s time zones.
It includes a daylight saving time indicator for both the Home and Des-
tination options.
If you have set both the World Time’s Destination information and your
travel dates in the TRAVEL DATE command, the camera will automatically
display the correct date and time while you are traveling, along with the
number of days you are currently into your travel itinerary.
Enter in Information
When you first enter the WORLD TIME command, or when you enter the
command after you execute a RESET command, you will be prompted to
enter your Home time zone.
If you are traveling, enter a Destination time zone.
The last entered time zone becomes the camera’s internal clock value. If
you have not yet started your trip, return to the Home option and press
the MENU/SET button when the Home time zone is displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
