141
6. Focus and Brightness (Exposure) Settings
• Perform the operation after cancelling the touch shutter function.
• When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to
[AF].
When selecting [š], [Ø]
Position and size of the AF area can be changed.
1 Select [š] or [Ø] and press 4.
•
AF area setting screen is displayed.
2 Press 3/4/2/1 to move the AF area.
•
AF area can also be moved by touching the subject.
• Press [DISP.] to return the AF area to the centre of the
screen.
3 Rotate the control dial to change the size of AF area
frame.
•
It can be changed to 4 different sizes.
• The area size can also be changed by pinching out/
pinching in (P15) on the screen.
4 Press [MENU/SET] to set.
•
AF area with the same function as [Ø] is displayed in the
touched position, when the [š] is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [ ] is touched.
When selecting [ ]
The 23 AF areas can be divided into 9 areas and the area to be focused can be set.
1 Select [ ] and press 4.
•
AF area setting screen is displayed.
2 Press 3/4/2/1 to select the AF area frame as
shown in the figure on the right.
•
AF area frame can also be selected by touching the
screen.
3 Press [MENU/SET] to set.
•
Only [i] display (centre point of selected AF area frame)
will remain on the screen.
• Setting of the AF area frame is cleared when [MENU/SET] is pressed or [ ] is touched.
Setting up position of the AF area/changing size of the AF area
To Next Page
Loading...
