62
3. Basic Operation
Switching the Information Displayed on the
recording screen
¢ Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON].
It is also possible to display the Exposure meter by setting the [Expo.Meter] of the [Custom]
menu to [ON]. (P84)
• If approximately 1 minute elapses without an operation being performed, part of the display will
disappear. Press [DISP.] or touch the monitor to make the display reappear.
Press [DISP.] to change.
• Screen will switch as follows:
With
information
¢
Without
information
With information
(tilt sensor
display)
¢
Without
information
(tilt sensor
display)
To Next Page
Loading...
