247
12. Using the Wi-Fi function
1 Connect to a smartphone/tablet. (P246)
2 Select [ ] on the smartphone/tablet.
•
The recorded images are saved in the camera.
• Some settings are not available.
• The screen differs depending on the OS.
• When a high ambient temperature, continuous motion picture
recording or other conditions are causing the camera to
overheat, [ ] flashes. If a message is displayed after [ ]
flashes, the camera will turn off automatically to protect itself.
When this happens, some functions will be disabled until the
camera cools down.
1 Connect to a smartphone/tablet. (P246)
2 Select [ ] on a smartphone/tablet.
3 Drag an image to save it.
•
If an image is touched, the picture will be played back in an
enlarged size.
• The function can be assigned to the top, bottom, left or
right according to your preference.
Taking pictures via a smartphone/tablet (remote recording)
Saving images stored in the camera
To Next Page
Loading...
