21
2. Preparations before Recording
• Remove the lens rear cap from the lens.
• If the body cap is fitted to the camera, remove it.
Align the lens fitting marks A and then rotate the lens in the direction of
the arrow until it clicks.
• Do not press the lens release button B when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
• Do not insert your fingers into the mount when the lens and body cap
are removed from the camera body.
• It is recommended to attach the lens cap or attach the MC Protector
(optional) to protect the lens surface when carrying. (P305)
Attaching the lens
To Next Page
Loading...
