242
12. Using the Wi-Fi function
∫ About the Wi-Fi connection lamp
∫ About the [Wi-Fi] button
At the time of purchase, [Wi-Fi] is set to [Fn1].
In the chapter for “Using the Wi-Fi function”, [Fn1] is written
as [Wi-Fi].
•
Refer to P43 for details about the function button.
∫ What you can do with the [Wi-Fi] button when connected to Wi-Fi
If [Wi-Fi] button is pressed when connected to Wi-Fi, the following operations can be
performed.
¢ This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
Lit blue: The Wi-Fi connection is on standby
Blinking blue: Sending/receiving data through the Wi-Fi
connection
[Terminate the Connection] Terminates the Wi-Fi connection.
[Change the Destination]
Terminates the Wi-Fi connection, and allows you to
select a different Wi-Fi connection.
[Change Settings for Sending
Images]
¢
Refer to P282 for details.
[Register the Current Destination
to Favorite]
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
[Network Address] Displays the MAC address and IP address of this unit.
To Next Page
Loading...
