264
12. Using the Wi-Fi function
1 Select the menu.
2 Select [Via Network], and connect. (P274)
3 Select a web service you want to connect.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P282)
4 Select [Single Select] or [Multi Select].
•
To change the setting or disconnect, press [Wi-Fi]. (P242)
Select and send the images ([Send Images Stored in the Camera])
[Wi-Fi] > [New Connection] > [Send Images Stored in the Camera] > [Web
service]
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is cancelled when the picture is selected
again.
2 Select [OK].
•
The number of pictures that can be sent by [Multi
Select] is limited.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
6HW
2.
To Next Page
Loading...
