47
2. Preparations before Recording
• When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] is set to [OFF].
• When you connect the camera to a TV, the volume of the TV speakers does not change. Also,
when connected, no sound is output from the camera speakers.
• When [Silent Mode] is set to [ON], the volume is set to 0.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
[Beep]
This allows you to set the volume for electronic sound and the
electronic shutter sound.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
[Shutter Vol.]:
[] (High)
[] (Low)
[] (OFF)
[Shutter Tone]:
[]/[]/[]
[Speaker Volume] Adjust the volume of the speaker to any of the 7 levels.
[Monitor Display]
Brightness, colour, or red or blue tint of the Monitor is adjusted.
[] ([Brightness]):
Adjust the brightness.
[] ([Contrast · Saturation]):
Adjust the contrast or clarity of colours.
[] ([Red Tint]):
Adjust the red tint.
[] ([Blue Tint]):
Adjust the blue tint.
1 Select the settings by pressing 3/4, and adjust with
2/1.
•
Adjusting can also be performed by rotating the control dial.
2 Press [MENU/SET] to set.
To Next Page
Loading...
