50
2. Preparations before Recording
[Output]
This sets how the unit connects to a television etc.
[Video Out]:
Set to match the colour television system in each country.
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
•
This will operate when the AV cable (optional) or HDMI micro cable is
connected.
[TV Aspect]:
Set to match the type of TV.
[16:9]:
When connecting to a 16:9 screen TV.
[4:3]:
When connecting to a 4:3 screen TV.
•
This will work when the AV cable (optional) is connected.
[HDMI Mode]:
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI micro cable.
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for
output.
[720p]:
The progressive method with 720 available scan lines is used
for output.
[576p]
¢1
/[480p]
¢2
:
The progressive method with 576
¢1
/480
¢2
available scan lines
is used for output.
¢1 When [Video Out] is set to [PAL]
¢2 When [Video Out] is set to [NTSC]
• This will work when the HDMI micro cable is connected.
• If the images are not output on the TV when the setting is [AUTO],
match with the image format your TV can display, and select the
number of effective scanning lines.
(Please read the operating instructions for the TV.)
To Next Page
Loading...
