84
4. Recording Modes
• If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turn red and blink.
Displaying/not displaying the exposure meter
[MENU] > [Custom] > [Expo.Meter] > [ON]/[OFF]
B Exposure meter
• Set to [ON] to display the Exposure meter when correcting
exposure, performing Programme Shift, setting aperture, and
setting shutter speed.
• Unsuitable areas of the range are displayed in red.
• When the Exposure meter is not displayed, switch the display
information for screen by pressing [DISP.]. (P62)
• The Exposure meter disappears after approximately 4 seconds if no operation is performed.
2
00
SS
SS
F
250 15
4.0 5.6 8.0
3060125
98
98
0
604.0
604.0
To Next Page
Loading...
