5. Focus and Brightness (Exposure) Settings
156
∫ About the focus distance reference mark
Achieving focus quickly using Auto Focus
In Manual Focus, if the function button to which [AF/AE LOCK] is set is pressed (P64),
Auto Focus will work.
•
[AF/AE LOCK] can only be assigned to [Fn1] or [Fn2].
• Auto Focus works at the center of the frame.
• If Auto Focus is used while the MF Assist screen is displayed,
the center of the MF Assist screen will be focused.
• Auto Focus also works with the following touch operations.
– Pressing the function button to which [AF-ON] is assinged
– Touching [ ]
– Dragging the monitor and releasing your finger at the position you want to focus on
The focus distance reference mark is a mark used to measure the focus distance.
Use this when taking pictures with Manual Focus or taking close-up pictures.
Focus range
A Focus distance reference mark
B Focus distance reference line
C 0.2 m (0.66 feet) (focal length 12 mm to 20 mm)
[When the interchangeable lens (H-FS12032) is used]
D 0.3 m (0.98 feet) (focal length 21 mm to 32 mm)
[When the interchangeable lens (H-FS12032) is used]
E 0.9 m (3.0 feet) [When the interchangeable lens (H-FS35100) is used]
F 0.2 m (0.66 feet) [When the interchangeable lens (H-X015) is used]
> [Custom] > [AF/AE Lock] > [AF-ON]
AF
AF
To Next Page
Loading...
