157
5. Focus and Brightness (Exposure) Settings
Setting the display method of the MF Assist (enlarged screen)
•
Available settings vary depending on the lens used.
Displaying/not displaying the MF Guide
A Indicator for ¶ (infinity)
When [MF Guide] on the [Custom] menu is set to [ON] and
you focus manually, the MF guide is displayed on the screen.
You can check whether the point of focus is to the near side
or the far side.
> [Custom] > [MF Assist]
When an interchangeable lens with no focus ring (H-FS12032) is used
[ON]
Focus can be adjusted when you press 2( ) and the screen that lets you set the
area to be enlarged is displayed.
[OFF]
Focus can be adjusted when you press 2( ). The screen that lets you set the area
to be enlarged is not displayed.
When an interchangeable lens having a focus ring (H-FS35100/H-X015) is used
[]
The screen is enlarged by operating the focus ring or the focus lever of the lens or by
pressing 2().
[]The screen is enlarged by operating the focus ring or the focus lever of the lens.
[]The screen is enlarged by pressing 2().
[OFF]
The screen cannot be enlarged by operating the focus ring or the focus lever of the
lens or by pressing 2().
> [Custom] > [MF Guide] > [ON]/[OFF]
To Next Page
Loading...
