Panasonic Lumix DMC-TZ100 User Manual

158
SQW0550
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
■
When selecting [ ]
You can set the focus position by selecting an AF area group. The
AF area, which is configured with 49 points, is divided into groups
consisting of 9 points each (6 points or 4 points for the groups
located at the edges of the screen).
Examples of group
Set the menu
→ [Rec] → [AF Mode]
Select [ ] and press
• The AF area setting screen appears.
Press to select an AF area group
• You can also select a group by touching the screen.
Press [MENU/SET]
• Only the [+] indications (centre points of the selected group) remain on
the screen.
• Setting of the AF area is cleared when [MENU/SET] is pressed or [
]
is touched.

Panasonic Lumix DMC-TZ100 Specifications

General

Effective Pixels	20.1 Megapixels
Lens	LEICA DC VARIO-ELMARIT
Aperture	F2.8 - F5.9
Battery Life	Approx. 300 shots (CIPA Standard)
Dimensions	110.5 x 64.5 x 44.3 mm
Image Processor	Venus Engine
Built-in Flash	Yes
Sensor	1-inch High Sensitivity MOS Sensor
ISO Sensitivity	125-12800 (expandable to 80-25600)
Shutter Speed	60 - 1/2000 sec (Mechanical)
Video Recording	4K UHD (3840 x 2160) at 30p
Viewfinder	0.2-inch 1, 166k-dot EVF
LCD Monitor	3.0-inch TFT LCD (1, 040k dots)
Image Stabilization	5-axis Hybrid O.I.S. (Optical Image Stabilizer)
Weight	Approx. 312g
Connectivity	Wi-Fi, USB 2.0
Storage Media	SD, SDHC, SDXC Memory Card
Focal Length	25-250mm (35mm equivalent)