Panasonic Lumix DMC-TZ100 User Manual

201
SQW0550
Shutter and Drive Settings
Selecting a Drive Mode
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [ ] button ( )
TZ100/TZ101
TZ80/TZ81
Drive Mode
2
Press to select the drive mode and
press [MENU/SET]
[Single]
When the shutter button is pressed,
only one picture is recorded.
[Burst] (→202)
The pictures are recorded in succession
while the shutter button is pressed.
[4K PHOTO]
(→184)
When the shutter button is pressed, a
4K photo is recorded.
[Auto
Bracket]
*
(→206)
When the shutter button is pressed,
the pictures are recorded with different
exposure settings based on the
Exposure Compensation range.
[Self Timer]
(→208)
When the shutter button is pressed,
recording takes place after the set time
has elapsed.
*
Cannot be set when using Intelligent Auto Mode.
• To cancel drive mode, select [ ] ([Single]) or [ ].
• When you press , you can change the settings of each drive mode. Note,
however, that you cannot change the settings of [Single].

Panasonic Lumix DMC-TZ100 Specifications

General

Effective Pixels	20.1 Megapixels
Lens	LEICA DC VARIO-ELMARIT
Aperture	F2.8 - F5.9
Battery Life	Approx. 300 shots (CIPA Standard)
Dimensions	110.5 x 64.5 x 44.3 mm
Image Processor	Venus Engine
Built-in Flash	Yes
Sensor	1-inch High Sensitivity MOS Sensor
ISO Sensitivity	125-12800 (expandable to 80-25600)
Shutter Speed	60 - 1/2000 sec (Mechanical)
Video Recording	4K UHD (3840 x 2160) at 30p
Viewfinder	0.2-inch 1, 166k-dot EVF
LCD Monitor	3.0-inch TFT LCD (1, 040k dots)
Image Stabilization	5-axis Hybrid O.I.S. (Optical Image Stabilizer)
Weight	Approx. 312g
Connectivity	Wi-Fi, USB 2.0
Storage Media	SD, SDHC, SDXC Memory Card
Focal Length	25-250mm (35mm equivalent)